• Preformed Dampers

    Preformed DampersPreformed Dampers can be installed quickly and conveniently by hands without any tools. The grip strength is distributed evenly within 60cm area of Preformed Rods and conductor, and it avoids stress concentration of conductors. The excellent performance of...

  • Cable Joint Boxes

    Cable Joint BoxesCable Joint Box is designed for splicing ADSS,OPGW cables and the normal cables, including two to four sleeves for input and output. Loose storage space makes storage more conveniently, quickly and cable bending radius big enough, avoiding fiber optic...

  • Low Tensile Force Strain Clamp

    Low Tensile Force Strain ClampThe low tensile force tension clamp for ADSS cable is single preformed rods structure, simple and reliable, convenient and quick installation, it is specially designed for short span length low tensile force ADSS cable.

  • Middle And Low Tensile Force Dead End Clamp

    Middle And Low Tensile Force Dead End ClampMiddle And Low Tensile Force Dead end Clamp is designed to connect ADSS cables and poles/towers . Armor rods can provide protection and cushioning to the ADSS cables. The special design of Preformed rods makes ensure that Tension Clamps can't cause...

  • Middle And Low Tensile Force Strain Clamps

    Middle And Low Tensile Force Strain ClampsMiddle and Low Tensile Force Strain Clamps are designed to connect ADSS cables and poles/towers . Armor rods can provide protection and cushioning to the ADSS cables. The special design of Preformed rods makes ensure that Tension Clamps can’t cause undue...

  • Middle And Low Tensile Force Tension Clamps

    Middle And Low Tensile Force Tension ClampsTension Clamps are designed to connect ADSS cables and poles/towers . Armor rods can provide protection and cushioning to the ADSS cables. The special design of Preformed rods makes ensure that Tension Clamps can’t cause undue stress to the ADSS cables, so...

  • High Tensile Force Dead End Clamp For ADSS Cable

    High Tensile Force Dead End Clamp For ADSS CableThe High Tensile Force Dead end Clamp for ADSS Cable means it acts as a connecting rod for connecting ADSS towers with towers. Unlike bolted tension clamps and wedges, the ADSS cable tension clamps can only be used in a permanent safe use when the line is...

  • 70KN Grip Strength Of Dead End Clamp

    70KN Grip Strength Of Dead End Clamp70KN Grip Strength of Dead End Clamp are designed to connect OPGW cables and tensile poles (or towers). Armor rods can protect and provide cushioning to the OPGW cables. The special design of Armor rods makes ensure that Tension Clamps can not cause undue...

  • 100kN Grip Strength Of Strain Clamps

    100kN Grip Strength Of Strain Clamps​100kN grip strength of strain clamps for OPGW Cable are designed to connect OPGW cables and tensile poles (or towers). Armor rods can protect and provide cushioning to the OPGW cables. The special design of Armor rods makes ensure that Tension Clamps can...

  • Suspension Clamps(AXJ Type)

    Suspension Clamps(AXJ Type)Suspension Clamps(AXJ Type) are the connecting hardware of ADSS cable which hanging in transmission line pole (tower). It can reduce static stress at the support point, improve cable ant-vibration ability, and cushioned against the dynamic stress of...

  • Suspension Clamps(ACL Type with Armor Rods)

    Suspension Clamps(ACL Type with Armor Rods)1.It is designed to connect straight or elevation angel less than 25° pole (tower) and ADSS cables, The special specification: one unit per pole.
    2. Select the specification model for Suspension Clamp is corresponding to the appropriate Cable...

  • Middle Short Span Suspension Clamps(AXL)

    Middle Short Span Suspension Clamps(AXL)Single layer of Preformed Rods design can be used reliably and stably for a long time, as well as offers a cheaper solution for ADSS cable projects for the users.