Double Suspension Clamp

We are the insulator supplier of porcelain insulators, mainly in disc suspension insulator, line post insulator, station post insulators, power fittings for power transmission lines and substations. Except this, we also provide whole project contract service. We welcome clients at home and abroad cooperating with us.

Product name：Double Suspension Clamp

Place of origin：China        Payment: T/T, L/C

Size: Customized size        Sample: Available

Delivery time: 20-40 days

Structure and Material:
    The product is combined Clamp, including a Yoke Plate( consist of Housings, Rubber Inserts, Bolt, Split Washer, Flat Washer, Nut and Lock Pin ), a unit of HSU Rods and a unit of Armor Rods. Armor Rods, which are directly wrapped outside of the cable and gripped by Rubber Inserts, provide protection and hardness for the cable. HSU Rods gripped by Housings press the Rubber Insert.
Housing------It is made of cast aluminum alloy, which is stable, better anticorrosive in areo and mechanical performance.
Rubber Insert------It is made of high-class rubber, compounded for resistance to ozone, wheathering extreme high and low temperature variations and compression set.
Bolt, Nut, Split Washer, Lock Pin------Hot dipped galvanized.
Flat Washer------Electric power standards
Anchor Shackle------Electric power standards
Armor Rods ------High strength aluminium alloy for wheathering extreme high and low temperature variations, compression set, water resistance and high hardness.
HSU Rods------the same to Armor Rods
Connected Hardware----- Anchor Shackle, Clevis Screw, UB Clevis Eye, ZH Clevis Eye, Electric Power standards.

Data sheet of Double Suspension Clamp For OPGW Cable:

Products are sold as an assembly, including a unit of Armor Rods, a unit of HSU Rods, a pair of Housing, Clevis Screw a pair of Rubber Insert and selected connecting Hardware corresponding to the suspension way.

Installation Sketch Map：

Application Guide for Double Suspension Clamp:
    1.It is designed to connect corner/elevation angel smaller than 25°Pole and the Cable, a unit of Suspension Clamps per pole.
    2.Select the Catalog Number corresponding to the appropriate cable range, Load-weight or Span Length.
    3.It is suitable to OPGW Cable.
   4.The normal form can be directly used according to the hanging wire way. Select one from two different combinations matching the Suspension Clamp.

1.  What's your advantage?

We focus on providing high-quality power fittings for many years, and will give you the most suitable price and comfortable after-sales service.

2.  What's the payment term?

T/T or L/C at sight.

3.  How's the delivery time?

Generally, it will take 20 to 40 days after receiving your advance payment. The specific delivery time depends on the products and the quantity of your order.

4.  Can I have some samples?

Few pcs of product's samples are available, but the freight should be collected.

5.  What's the standard of package?

We usually pack our goods in cartons or pallets. We can also pack them according to your special requirements.

6.  How about the transport?

If the number of goods is small we usually use DHL and some express you offered. If the number of the goods is big usually by sea or by air.