1. Loosen 10 fastening bolts in order, while the lid and seat are still together.
2. Take four fastening bolts respectively into the box body Four corners, symmetrical, evenly rotating in the four corners of the top cover, so that the cover and seat separation up to 6mm.
3. After 5 minutes, the lid and the seat are separated >6mm by the uniform top cover until the cover and seat can be separated easily by hand. Note: The separation must be gently removed from the cover, so as to avoid damage to the weld fiber.
4. If the increase or the completion of the inspection, the need for a new cover, the old seal must be cleared, and the sealing strip to the sealing groove, including "U" groove Cable inlet end of the seal.
- Anti-Vibration Hammer Installation ...
- Precautions For Installation Of Gla...
- Name And Usage Of Electric Power Tools
- Grounding Wire Clamp Related Knowledge
- Characteristics Of The Clamp
- Application Field Of U-bolts
- The Development Prospect Of Insulat...
- The Practice Of Thunder-proof Press...
- Assembling Method Of Lightning-proo...
- Development Of Anti-Vibration Hammer
- Power Line Icing And Icing Overload
- Ice-covered Dance And Icing Shedding