Guy Wire Strain Clamps
★ Guy wire strain clamps UT Wedge Clamps (Adjustable Type)
★ UT Wedge Clamps (Non-Adjustable Type)
The Guy Wire Strain Clamp adopts wedge-shaped self-locking structure, and the steel strands are clamped in the online groove. It is usually used for the lower end of the wire rod and tower.
Product name：Guy Wire Strain Clamps
Place of origin：China Sample: Available
OEM size: YES Shipping: Air, Sea, Fast express
Payment: T/T, L/C Delivery Time: 20-45 days
◆UT Wedge Clamps (Adjustable Type)
(mm) Steel Wire Dia
(N) Rated Failure Load
◆UT Wedge Clamps (Non-Adjustable Type)
(mm) Steel Wire Dia
(KN) Rated Failure Load
Introduction to the attention points of Guy Wire Strain Clamp installation：
1. Before the installation of the screw thread should be coated with lubricant.
2. The contact between the tongue clamp and the drawing line should be tight, no sliding phenomenon is observed after the force is applied, and the line clamp is convex on the tail line side.
3. The Guy Wire Strain Clamp with the upper nut, the screw thread length should be the total length of the thread of the 1/3, after the tightening, the double nut of the Guy Wire Strain Clamp should be tight.
1. What's your advantage?
We focus on providing high-quality power fittings for many years, and will give you the most suitable price and comfortable after-sales service.
2. What's the payment term?
T/T or L/C at sight.
3. How's the delivery time?
Generally, it will take 20 to 40 days after receiving your advance payment. The specific delivery time depends on the products and the quantity of your order.
4. Can I have some samples?
Few pcs of product’s samples are available, but the freight should be collected.
5. What's the standard of package?
We usually pack our goods in cartons or pallets. We can also pack them according to your special requirements.
6. How about the transport?
If the number of goods is small we usually use DHL and some express you offered. If the number of the goods is big usually by sea or by air.