Large Span Suspension Clamp
★ Protect the ADSS fiber cable to operate safely under the condition of unbalanced load
★ Enhance the rigidity of the ADSS optical cable and the protective effect is better
★ Improve the anti-vibration energy of the cable
The Suspension Sets of Large Span Suspension Clamp are designed to reduce static stress at the support point of ADSS cable, as well as ensure that the cable is cushioned against the dynamic stress of aeolian vibration. The combination of the HSU and Armor Rods provides protection against cable bending stress, there is no other stress concentration, so that the fiber optic doesn't produce extra loss in the cable.
Product name：Large Span Suspension Clamp
Place of origin：China Breaking Strength: 70KN
Recommended Span Length: 700-1000m
Suspension Sets for greater than 600m Span Length
Standards information of Large Span Suspension Clamp:
|Inner Protection Rods||Outer Reinforcing Rods||Color|
|AXF 1150 070||10.9-11.5||1900||11||1100||11||green|
|AXF 1220 070||11.6-12.2||1920||12||1120||12||cyan|
|AXF 1290 070||12.3-12.9||1940||12||1140||13||blue|
|AXF 1360 070||13.0-13.6||1960||13||1160||13||purple|
|AXF 1430 070||13.7-14.3||1980||13||1180||13||black|
|AXF 1500 070||14.4-15.0||2100||12||1300||12||red|
|AXF 1570 070||15.1-15.7||2140||12||1340||12||orange|
|AXF 1640 070||15.8-16.4||2180||13||1380||12||yellow|
|AXF 1710 070||16.5-17.1||2220||13||1420||13||green|
|AXF 1780 070||17.2-17.8||2260||13||1460||13||cyan|
|AXF 1850 070||17.9-18.5||2300||14||1500||13||blue|
Structure and Raw Material of large span suspension clamp:
Shackle--Hot dip galvanized steel. Shackle is connected with Reinforcing Pole units.
Twisted Chain Link--Hot dip galvanized steel. Twisted Chain Link is intended for connecting Shackle and
Thimble---Hot dip galvanized cast steel. Thimble is plugged in shackle of Tension Clamp for protection and connection.
Armor Rods----- Aluminum clad steel wire. Armor Rods increase friction with a layer of particle emery inside to cables. Rods are assembled into four subsets in workshop which reduce misalignment errors and speeds installation. The ends are bent outward to provide stress relief at the critical cable departure areas.
Preformed Dead End -- Preformed Dead End are made of hot dip galvanized steel wire or aluminum clad steel wire, it is assembled into one subset with a layer of firm emery inside in workshop for increasing grip strength of Tension Clamps while decreasing side pressure.
1. What's your advantage?
We focus on providing high-quality power fittings for many years, and will give you the most suitable price and comfortable after-sales service.
2. What's the payment term?
T/T or L/C at sight.
3. How's the delivery time?
Generally, it will take 20 to 40 days after receiving your advance payment. The specific delivery time depends on the products and the quantity of your order.
4. Can I have some samples?
Few pcs of product's samples are available, but the freight should be collected.
5. What's the standard of package?
We usually pack our goods in cartons or pallets. We can also pack them according to your special requirements.
6. How about the transport?
If the number of goods is small we usually use DHL and some express you offered. If the number of the goods is big usually by sea or by air.